Overview

A W.A.G.E.S Utility Monitoring System tracks consumption across five resource streams in a single platform: Water, Air, Gas, Electricity, and Steam. By centralising utility data from meters and sensors, a W.A.G.E.S system gives facility teams the visibility they need to identify waste, allocate costs accurately, and verify sustainability performance against regulatory and corporate targets.

EcoXplore's W.A.G.E.S Utility Monitoring System is built on the PecStar® iEMS platform. It collects data from utility meters across all five streams, normalises units to a common reporting framework (kWh-equivalent or cost-equivalent), and presents consumption in unified dashboards. Teams can drill from facility-level totals down to individual circuits, pipes, or production lines.

What W.A.G.E.S Stands For

Water, Air, Gas, Electricity, Steam. The acronym originated in industrial energy auditing as shorthand for the five utilities that drive operating cost in most manufacturing, healthcare, and commercial environments. Treating these utilities as a single monitoring problem (rather than five separate ones) reveals interdependencies that single-utility tools miss: for example, compressed air leaks that show up as electricity waste at the air compressor, or steam losses that show up as gas waste at the boiler.

Why Multi-Utility Monitoring Matters

Most facilities meter electricity well, water adequately, and gas, air, and steam barely at all. Compressed air, in particular, is famously the most expensive utility per delivered unit of useful work but is rarely sub-metered. The result: facilities make large investments in electricity efficiency while leaving 20 to 30 percent of total utility cost invisible.

A W.A.G.E.S platform breaks this asymmetry. By treating all five streams with the same metering rigor, it surfaces waste that single-utility systems miss and allows accurate cost allocation across processes, tenants, or production lines.

What We Track Per Utility

Water: Flow rate, total consumption, pressure, and (where relevant) quality parameters. Sub-metering supports tenant billing in commercial buildings and waste detection in manufacturing.

Air (Compressed Air): Flow rate, pressure, dew point, and energy consumed at the compressor. Most industrial air systems leak 20 to 30 percent of their output; W.A.G.E.S monitoring catches these leaks before they show up on the electricity bill.

Gas (Natural Gas, LPG): Volumetric flow, pressure, temperature compensation, and energy content. Critical for manufacturing, hospitality (kitchens), and any facility with gas-fired heating or process equipment.

Electricity: Multi-circuit power monitoring with active power, reactive power, voltage, current, frequency, and power factor. Integrates with our Power Quality Monitoring System (PQMS) for facilities that need voltage stability and harmonic analysis.

Steam: Mass flow, pressure, temperature, and condensate return rates. Steam systems are notoriously inefficient because losses are invisible without dedicated monitoring; a W.A.G.E.S system makes them measurable.

W.A.G.E.S vs Sub-Metering vs Smart Meters: What's the Difference?

Smart Meters: Single-utility meters with communications (typically electricity). Suitable for billing-grade measurement but limited to one resource stream.

Sub-Metering: Adds granularity within a facility (per floor, per tenant, per circuit) but typically still single-utility.

W.A.G.E.S: Adds breadth across all five utility streams plus the central platform that normalises and reports across them. The right choice for facilities serious about total utility cost management.

Applications by Industry

Manufacturing: Track utility consumption per production line and per unit produced. Compressed air audits typically reveal 20 to 30 percent waste. Combined energy and gas data supports ISO 50001 certification and Carbon Pricing Act reporting.

Commercial Real Estate: Tenant-level sub-metering across water, electricity, and gas supports accurate utility billing and reduces disputes. Useful for green-lease compliance.

Data Centres: Water (cooling), electricity (IT and cooling load), and (sometimes) gas (backup generators) all monitored in one platform. Feeds PUE calculations and IMDA reporting.

Hospitals and Healthcare: Critical-load monitoring across electricity and steam (sterilisation), with water sub-metering for ward-level cost control.

Singapore Regulatory Context

For Singapore facilities, W.A.G.E.S data feeds several reporting frameworks: BCA Green Mark energy use intensity (EUI) calculations, Singapore Carbon Pricing Act emissions data (Scope 1 gas + steam, Scope 2 electricity), and ACRA SGX climate-related disclosures (mandatory FY2025 for SGX-listed companies, FY2027 for non-listed firms above SGD 1 billion revenue). The Singapore Green Plan 2030 targets for the Built Environment sector make multi-utility tracking increasingly a regulatory expectation, not just a cost control tool.

Integration with EMS

W.A.G.E.S is most powerful when integrated with a full Energy Management System. The EMS layer adds automation (load shedding, demand response, setpoint optimisation) on top of the W.A.G.E.S monitoring foundation, turning visibility into action.

Features

• Management of building or site utility costs across all five streams
• Remote sub-meter monitoring for accurate itemised billing
• Connect to remote utility meters via any network type (Modbus RTU, Modbus TCP, BACnet, MQTT, LoRaWAN, ZETA)
• Single data access point per building or site
• Time-of-use cost allocation and tariff modelling
• Automated reporting aligned with Carbon Pricing Act and ACRA SGX disclosure requirements

Benefits

• Real-time view of energy and utility usage to enable instant savings identification
• Remote monitoring of multiple sites reducing administration costs
• Alerts via email or SMS of consumption target breaches before they happen
• Cross-utility waste detection (e.g., compressed air leaks visible as electricity waste)
• Verified data for sustainability reporting and carbon tax compliance

Related Solutions

• Energy Management System (EMS) – the broader platform for integrated monitoring, control, and optimisation
• Power Quality Monitoring System – dedicated power quality analysis
• AIoT for Facility Management – wireless sensor deployment for hard-to-meter points

Recommended Products

• PMC-53A – multifunction power meter for accurate energy tracking
• ePrecision X3000 – multi-circuit power meter
• Ultrasonic Bulk Water Meter – non-invasive water flow measurement
• Clamp-on Ultrasonic Heat Meter – steam and chilled water energy
• ZETA Mote – LPWAN sensor for hard-to-wire metering points

Frequently Asked Questions

What does W.A.G.E.S stand for?

Water, Air, Gas, Electricity, Steam. The five utility streams that typically account for the bulk of operating costs in commercial, industrial, and healthcare facilities.

Do I need W.A.G.E.S monitoring or just electricity sub-metering?

If electricity is your only significant utility cost, sub-metering is enough. If you also have meaningful compressed air, gas, water, or steam costs, W.A.G.E.S monitoring catches the waste that single-utility systems miss. Manufacturing, hospitals, hotels, and data centres almost always benefit from W.A.G.E.S.

Can W.A.G.E.S integrate with my existing meters?

Yes. EcoXplore's W.A.G.E.S platform supports Modbus RTU, Modbus TCP, BACnet, MQTT, LoRaWAN, and ZETA. We bridge legacy meter protocols where needed.

Does W.A.G.E.S support tenant billing?

Yes. Sub-meter data can be allocated to tenant accounts using configurable tariff structures, time-of-use rates, and apportionment rules.

How does W.A.G.E.S support Singapore Carbon Pricing Act reporting?

Gas and steam consumption feed Scope 1 emissions calculations; electricity feeds Scope 2. The platform exports the data series in the format required for facility-level carbon tax filings.

Get Started

Ready to deploy a W.A.G.E.S Utility Monitoring System for your facility? Contact our engineering team for a free site assessment and customised proposal.

水、气、空气、电力与蒸汽的自动远程抄表系统

‍
集中管理所有能源来源能够显著提升能源效率，降低成本，并带来快速的投资回报。在这些能源种类中存在的浪费都会转化为不必要的支出，因此我们必须警惕如压缩空气或蒸汽泄漏、低效照明等潜在问题。

EcoXplore 提供远程抄表技术，支持对水、空气、燃气、电力与蒸汽（WAGES）进行自动监测。我们的平台将多种能源（如电力与燃气）整合至单一报告中，帮助您准确掌握某一子区域、单个或多个站点的整体能耗。

有效的能源管理可提升效率、节省能源浪费，并提高盈利能力。
对设备的能耗进行计量就像管理其他宝贵投入一样。电量（kWh）的柱状图可按时间、分类或堆叠方式展示。
能耗计量可促进主动能源管理，从源头防止浪费。
了解能耗来源是第一步；一旦掌握了能源流向，就能分析信息、管理使用，从而消除浪费。

功能特点：

• 建筑/站点公用设施成本管理
• 远程子表监控，实现精准分项计费
• 可通过任意网络类型连接远程计量设备
• 每个建筑/站点的统一数据访问接口

优势：

• 实时掌握能源使用情况，实现即时节能
• 远程多站点监控，降低行政管理成本
• 达标预警功能：通过电子邮件或短信在异常发生前提前通知

ระบบอ่านมิเตอร์ระยะไกลอัตโนมัติสำหรับน้ำ อากาศ ก๊าซ ไฟฟ้า และไอน้ำ

‍
การจัดการแหล่งพลังงานทั้งหมดในศูนย์กลางเดียวช่วยเพิ่มประสิทธิภาพในการใช้พลังงาน และลดต้นทุนอย่างมีนัยสำคัญ พร้อมให้ผลตอบแทนอย่างรวดเร็ว
ความสูญเปล่าในหมวดใดก็ตาม หมายถึงค่าใช้จ่ายที่ไม่พึงประสงค์ จึงควรระวังการรั่วไหลของอากาศอัดหรือไอน้ำ แสงสว่างที่ไม่มีประสิทธิภาพ และปัจจัยเสี่ยงอื่น ๆ

EcoXplore มีเทคโนโลยีที่ช่วยให้คุณสามารถตรวจวัดพลังงานจากระยะไกลสำหรับน้ำ อากาศ ก๊าซ ไฟฟ้า และไอน้ำ (WAGES)
แพลตฟอร์มของเรารวมประเภทพลังงานต่าง ๆ เช่น ไฟฟ้าและก๊าซไว้ในรายงานเดียว ทำให้สามารถดูข้อมูลการใช้พลังงานรวมในพื้นที่ที่มีมิเตอร์ย่อยแบบแม่นยำ ทั้งจุดเดียวหรือหลายจุด

การบริหารจัดการพลังงานที่มีประสิทธิภาพช่วยเพิ่มประสิทธิผล ประหยัดพลังงาน และเพิ่มกำไร
การวัดการใช้พลังงานของอุปกรณ์ก็เหมือนการบริหารทรัพยากรอื่น ๆ กราฟแสดงการใช้พลังงานรวม (kWh) สามารถจัดกลุ่มตามช่วงเวลา หรือแสดงแบบซ้อนทับ
การมีระบบมิเตอร์ช่วยให้สามารถบริหารพลังงานอย่างกระตือรือร้น และป้องกันการสูญเสีย
การรู้แหล่งพลังงานที่ใช้เป็นก้าวแรก เมื่อรู้แล้วจึงสามารถวิเคราะห์ จัดการ และลดการสูญเปล่าได้

คุณสมบัติ:

• บริหารต้นทุนค่าสาธารณูปโภคในอาคาร/สถานที่
• ตรวจสอบมิเตอร์ย่อยระยะไกล สำหรับการออกบิลแยกค่าใช้จ่ายแบบแม่นยำ
• เชื่อมต่อกับมิเตอร์ระยะไกลได้ผ่านทุกประเภทเครือข่าย
• จุดเข้าถึงข้อมูลรวมสำหรับแต่ละอาคาร/ไซต์

ประโยชน์:

• ดูการใช้พลังงานแบบเรียลไทม์ พร้อมดำเนินการประหยัดทันที
• ตรวจสอบหลายไซต์จากระยะไกล ช่วยลดค่าใช้จ่ายด้านการบริหารจัดการ
• แจ้งเตือนผ่านอีเมลหรือ SMS เมื่อใกล้ถึงจุดเกินเป้าหมาย ก่อนเกิดเหตุการณ์จริง

Pembacaan Meter Jarak Jauh Otomatis untuk Air, Udara, Gas, Elektrik dan Uap

‍
Mengelola semua sumber energi di satu lokasi pusat akan meningkatkan efisiensi energi dan mengurangi biaya dengan ketara, memberikan imbal hasil investasi yang cepat. Pemborosan dalam mana-mana kategori ini bermakna perbelanjaan tidak diingini, maka penting untuk memantau kebocoran udara termampat atau uap, pencahayaan tidak efisien dan masalah lain yang berpotensi.

EcoXplore menyediakan teknologi yang memungkinkan pembacaan meter jarak jauh bagi air, udara, gas, elektrik dan uap (WAGES). Platform kami menggabungkan berbagai jenis energi seperti elektrik dan gas ke dalam satu laporan tunggal bagi memberikan gambaran jelas penggunaan energi keseluruhan dalam area bermeter sub, sama ada di satu atau berbagai lokasi.

Manajemen energi yang berkesan membawa kepada peningkatan efisiensi, penjimatan energi dan keuntungan yang lebih tinggi.
Membaca penggunaan energi seperti mengelola input berharga lain. Carta bar kWh penggunaan gabungan bisa disusun sesuai masa atau dalam kelompok yang ditentukan.
Pemantauan energi membantu mendorong manajemen energi aktif untuk mengelakkan pemborosan.
Mengetahui sumber penggunaan energi adalah langkah pertama. Setelah itu, Anda bisa menganalisis, mengelola dan menghapuskan pemborosan.

Ciri-ciri:

• Pengelolaan biaya utiliti bangunan/tapak
• Pemantauan sub-meter dari jarak jauh untuk bil terperinci yang tepat
• Sambungan ke meter utiliti jauh melalui sebarang jenis jaringan
• Titik akses data tunggal untuk setiap bangunan/tapak

Manfaat:

• Paparan masa nyata penggunaan energi untuk penjimatan segera
• Pemantauan tapak berbagai dari jarak jauh mengurangi biaya pentadbiran
• Peringatan melalui emel atau SMS jika hampir melampaui sasaran sebelum sistem ini terjadi

Hệ thống đọc công tơ từ xa tự động cho nước, không khí, gas, điện và hơi nước

‍
Việc quản lý tất cả nguồn năng lượng tại một trung tâm giúp nâng cao hiệu suất sử dụng năng lượng, giảm chi phí đáng kể và mang lại lợi nhuận nhanh chóng. Lãng phí trong bất kỳ danh mục nào cũng dẫn đến chi phí không mong muốn, do đó cần đặc biệt lưu ý đến rò rỉ khí nén hoặc hơi nước, hệ thống chiếu sáng không hiệu quả và các vấn đề tiềm ẩn khác.

EcoXplore cung cấp công nghệ cho phép đo từ xa các loại năng lượng như nước, không khí, gas, điện và hơi nước (WAGES). Nền tảng của chúng tôi kết hợp nhiều loại năng lượng vào một báo cáo duy nhất, giúp bạn dễ dàng theo dõi tổng mức tiêu thụ năng lượng tại các khu vực được gắn công tơ phụ, cho một hoặc nhiều địa điểm.

Quản lý năng lượng hiệu quả giúp nâng cao hiệu suất, tiết kiệm năng lượng và tăng lợi nhuận.
Đo lường mức tiêu thụ năng lượng giống như việc quản lý các đầu vào quan trọng khác. Biểu đồ thanh (kWh) có thể được tổ chức theo thời gian hoặc nhóm theo dạng cụm hoặc xếp chồng.
Việc đo lường năng lượng giúp quản lý năng lượng một cách chủ động để ngăn chặn lãng phí.
Biết được nguồn tiêu thụ là bước đầu tiên, từ đó có thể phân tích, quản lý và loại bỏ phần năng lượng bị lãng phí.

Tính năng:

• Quản lý chi phí tiện ích của tòa nhà / địa điểm
• Giám sát công tơ phụ từ xa cho hóa đơn chi tiết chính xác
• Kết nối với công tơ tiện ích từ xa qua bất kỳ loại mạng nào
• Một điểm truy cập dữ liệu cho mỗi tòa nhà / địa điểm

Lợi ích:

• Xem sử dụng năng lượng theo thời gian thực để tiết kiệm tức thì
• Giám sát từ xa nhiều địa điểm giúp giảm chi phí hành chính
• Cảnh báo qua email hoặc SMS khi gần vượt mục tiêu, trước khi sự cố xảy ra